計標準尺寸（寬×高）為
最小：2000mm×2100mm
****：8000mm×6000mm
Designed to fit an opening size of (Wide×High)：
Min: 2000mm×2100mm
Max: 8000mm×6000mm 開/閉門速度約為：0.2m/s
Open/Close speed: 0.2m/s
門板均采用0.5mm鍍鋁鋅彩色鋼板，表面烤漆處理，厚度為25～30μm
0.5mm colored galvanized steel sections with 25～30μm thick baking finished facing
門板發泡密度≥42kg/m3,發泡材料采用美國亨斯邁聚氨酯系統料
Foaming density≥42kg/m3, with Huntsman polyurethane core
門板采用防夾手設計板型，厚度為40mm，高度為500mm
Pinch-resistant door panel is 40mm thick and 500mm high
采用2mm厚寶鋼產熱鍍鋅鋼板成型壓制而成，C型軌道
2mm C profile track, press formed by Baosteel hot-dipped galvanized steel
采用計算機設計扭簧平衡系統，可保持門體運動平穩、開啟順暢
Computer designed torsion counterbalance system can provide smooth door operation
彈簧材料為60Si2Mn，油淬火材料，循環使用壽命達30 000次以上
Torsion counterbalance springs are 60Si2Mn, oil tempered spring wire, providing a minimum 30,000 cycles
底部U型密封條，側部和頂部為快速嵌入式密封條
Bottom astragal is U profile, side and top are quick-set-in weatherseals
提升方式包括：標準提升方式、高位提升方式及垂直提升方式
Track design shall be standard lift, high lift and vertical lift
可選配置包括：采光窗、通行小門、電機、手動鏈輪、安全氣囊及裝卸平臺互鎖開關等
Option could be: vision window, pass door, motor, chain hoist, pneumatic safety device, leveler interlock switch, and etc
